The W10130913 Whirlpool Washer Drain Pump helps remove water from your washing machine during the drain cycle. If your Whirlpool washer is not draining, drains slowly, leaves water in the tub, or stops with wet clothes, a worn or damaged drain pump may need to be replaced.
Washer not draining? Replace the faulty pump with W10130913 and restore proper water drainage.
Replacing the faulty pump with the correct W10130913 washer drain pump can help restore proper water drainage and allow your washer to complete its wash, drain, and spin cycles normally.
W10130913 Washer Drain Pump Functions
The W10130913 Whirlpool Washer Drain Pump pumps wastewater out of the washer tub and sends it through the drain hose during the drain cycle. A properly working pump helps prevent standing water and allows the washer to move through the cycle correctly.
Common Problems Caused by a Bad Drain Pump
Colorful infographic showing common problems caused by a bad or blocked washer drain pump, including slow draining, standing water, wet clothes, unusual noise, and drain errors.
A failing or blocked drain pump may cause:
- Washer not draining
- Washer drains slowly
- Water left in the washer after a cycle
- Washer stops with water inside
- Drain cycle takes too long
- Clothes remain soaking wet after spin
- Humming or unusual noise during draining
- Washer cannot complete the cycle
- Drain-related error or fault
Tip: Before replacing the pump, check the drain hose and other accessible areas for clogs, coins, clothing, or other foreign objects that may restrict water flow.
Why Replace the W10130913 Drain Pump?
A damaged drain pump can prevent your washer from properly removing wastewater. Installing the correct replacement pump may help:
- Restore normal water drainage
- Reduce standing water in the tub
- Improve washer cycle performance
- Prevent clothes from remaining excessively wet
- Get your washer back to normal operation
Watch How to Replace the W10130913 Drain Pump
Learn how to replace the W10130913 Whirlpool washer drain pump with this helpful repair video from PartSelect. It shows the basic drain pump replacement process and can help you understand what is involved before starting the repair.
Check Your Washer Model Before Ordering
Washer drain pumps are model-specific, so do not rely on the part number alone. Check your washer’s model number and compare it with the listed compatible models before purchasing.
The model number is usually found on a label inside or around the washer cabinet, depending on the washer design.
W10130913 Replacement Part
Part Number: W10130913
Brand: Whirlpool
Part Type: Washer Drain Pump
Application: Washing Machine Drain System
Replacement Use: Replaces a worn, damaged, clogged, or failed drain pump when confirmed compatible with the washer model.
Compatible Whirlpool Washer Models
Use your exact washer model number to confirm compatibility with W10130913 before ordering.
The W10130913 Drain Pump is designed to fit many washers from Whirlpool, Kenmore, Maytag, Inglis, and Amana. It replaces multiple part numbers, including PS11757304, AP6023956, WPW10730972, 8540024, 8540025, 8540027, 8540028, 8540996, W10117829, W10130913, W10183434, W10190647, W10190648, W10201457, W10730972, W10135045, W10130913-B, 8540024-B, AP4308966, and PS1960402-2. Always verify your washer model and existing part number before ordering.
Important: Compatibility can vary by model revision and production series. Always verify the model number and replacement part information before purchase.
Is Your Whirlpool Washer Not Draining?
If your washer has water remaining inside after the cycle, first check for a simple blockage. Inspect the drain hose and accessible drain areas for kinks or foreign objects.
If the hose and other common causes are clear but the washer still cannot drain properly, the W10130913 Whirlpool Washer Drain Pump may be the replacement part you need.
Buy W10130913 Whirlpool Washer Drain Pump
Ready to repair your washer? Check the available W10130913 Whirlpool washer drain pump listings and compare price, shipping, seller information, and return policy before ordering.
Check the price and availability on eBay and make sure W10130913 matches your washer model before purchasing.
Related Whirlpool Washer Drain Pump Parts
Looking for a different drain pump? Explore our other Whirlpool washer drain pump parts to find the correct replacement for your washer. Compare part numbers and compatible models before ordering.
Affiliate Disclosure: This page may contain affiliate links. If you purchase a product through one of our links, FixCodex may earn a commission at no additional cost to you. This helps support our website and allows us to continue providing appliance repair information.
3 thoughts on “W10130913 Whirlpool Washer Drain Pump”