Restore Your Washer’s Performance with Genuine OEM Quality
Is your Whirlpool washer refusing to start, stopping in the middle of a cycle, or displaying random error codes? The W11607637 Whirlpool Washer Control Board is the genuine OEM replacement designed to restore normal washer operation.
Save Money with an OEM Repair
As the washer’s main electronic control board, this component manages essential functions including water fill, wash cycles, motor operation, draining, spinning, and communication with other components.
When the control board fails, your washer may become completely unresponsive or behave unpredictably. Replacing it with a genuine OEM part helps restore reliable factory performance.
Product Features
- Genuine OEM Whirlpool replacement part
- Part Number: W11607637
- Replaces Part Number: W11578563
- Factory-programmed for compatible washer models
- Direct-fit replacement
- Built to Whirlpool’s original specifications
- Helps restore proper washer performance and reliability
Common Symptoms of a Failed Control Board
Consider replacing your control board if your washer is experiencing:
- Washer won’t start
- Dead or blank control panel
- Buttons do not respond
- Washer stops during the cycle
- Cycles won’t advance
- Repeated error codes
- Washer won’t fill with water
- Washer won’t spin
- Washer won’t drain
- Random or erratic operation
- Continuous drain pump operation
- Cycle selection not working properly
These symptoms can also be caused by other faulty components, so proper diagnosis is recommended before replacing the control board.
Common Error Codes Related to a Faulty Control Board
A failed or malfunctioning W11607637 Whirlpool Washer Control Board may contribute to various washer error codes. While these codes do not always indicate a defective control board, they can appear when the board cannot properly communicate with other components or control the wash cycle.
Common error codes include:
- F1E1 – Main Control Board Failure
- F2E1 – Stuck or Shorted Button
- F3E1 – Water Level System Error
- F5E2 – Lid Lock Error
- F5E3 – Lid Unlock Failure
- F6E2 – Communication Error Between User Interface and Main Control
- F7E1 – Basket Speed Sensor Fault
- F7E5 – Shifter Fault
- F8E1 or LoFL – Low Water Fill
- F9E1 – Long Drain
- F0E2 – Oversuds Condition
Important
These error codes do not automatically mean the control board has failed. In many cases, the problem may be caused by another component such as:
- Lid lock assembly
- Water inlet valve
- Drain pump
- Pressure sensor
- Wire harness or loose electrical connections
- Shift actuator
- User interface control panel
- Motor or capacitor
Proper troubleshooting is recommended before replacing the control board. If testing confirms that the main electronic control board is defective, replacing it with the genuine W11607637 Whirlpool Washer Control Board can restore normal washer operation.
Compatible Brands & Washer Models
The W11607637 Whirlpool Washer Control Board is designed for use in select top-load washing machines manufactured by Whirlpool and its affiliated brands.
Compatible Brands
This OEM control board is compatible with select models from:
- Whirlpool
- Maytag
- Amana
- Kenmore (Whirlpool-built models)
- KitchenAid
- Jenn-Air
- Estate
- Roper
- Admiral
- Magic Chef
- Crosley
- Inglis
- Indesit
- Gladiator
- Norge
- Bauknecht
- Brastemp
- Consul
- Whirlpool Family Brands
- And other compatible Whirlpool-manufactured brands
Compatible Washer Models
This part fits select washer models, including but not limited to:
- NTW4519JW2
- WTW5000DW1
- WTW5000DW2
- MVWC565FW0
- MVWC565FW1
- MVWC565FW2
- WTW4850HW3
- WTW4855HW3
- WTW4655JW2
- RTW4519PW0
- ATW4519PW0
- ITW4880HW3
Note: This is only a partial list of compatible models. Your washer may also use this control board even if it is not listed above.
Verify Compatibility Before Ordering
To ensure you receive the correct replacement part, please verify your appliance’s complete model number before purchasing. If you’re unsure whether W11607637 is compatible with your washer, contact us with your model number, and we’ll be happy to help confirm compatibility.
Replacement Part Number W11578563
Installation
Difficulty: Moderate to Advanced
Basic installation steps include:
- Disconnect power from the washer.
- Remove the control console or top panel.
- Disconnect the wiring harnesses from the old control board.
- Install the new W11607637 control board.
- Reconnect all wiring exactly as originally installed.
- Reassemble the washer.
- Restore power and perform any required calibration or diagnostic procedures for your model.
Always disconnect electrical power before servicing your appliance.
Why Choose a Genuine OEM Control Board?
Using a genuine OEM replacement offers several advantages:
- Exact fit for compatible models
- Original Whirlpool quality
- Reliable electronic communication
- Proper cycle timing
- Improved long-term durability
- Maintains factory performance
OEM parts are designed specifically for your appliance, reducing compatibility issues often associated with aftermarket replacements.
Buy with Confidence on eBay
Purchase your W11607637 Whirlpool Washer Control Board with confidence from our trusted eBay store.
Why Buy From Us?
- Genuine OEM Whirlpool replacement part
- Carefully inspected before shipping
- Fast order processing
- Secure packaging to help protect electronic components during transit
- Competitive pricing
- Responsive customer support
- Trusted eBay seller with a commitment to customer satisfaction
Before You Buy
To ensure you receive the correct replacement part:
- Verify your washer’s complete model number.
- Confirm that W11607637 is the correct part number for your appliance.
- Compare your existing control board with the product photos when possible.
- If you’re unsure about compatibility, contact us before placing your order. We’re happy to help verify the correct part.
Fast & Secure Shipping
We carefully package every electronic control board to help prevent damage during shipping. Orders are processed promptly so you can get your washer back up and running as quickly as possible.
Shop with Confidence
Your satisfaction is our priority. Buy the genuine W11607637 Whirlpool Washer Control Board today and restore your Whirlpool washer with an OEM part designed for reliable performance.
Frequently Asked Questions
Is W11607637 an OEM part?
Yes. W11607637 is a genuine OEM Whirlpool washer control board.
What part does W11607637 replace?
It replaces W11578563.
How do I know if my control board is bad?
Common signs include a washer that won’t start, stops mid-cycle, displays persistent error codes, has an unresponsive control panel, or fails to complete wash cycles. Because other components can produce similar symptoms, additional troubleshooting may be required.
Will this fix my washer?
If the main electronic control board has failed, replacing it with the correct OEM part can restore normal operation. Always verify the diagnosis and model compatibility before ordering.
Order W11607637 Whirlpool Washer Control Board Today
Don’t let a faulty control board keep your washer out of service. Replace your failed electronic control board with the genuine W11607637 Whirlpool Washer Control Board and restore dependable washing performance.
Always verify your washer’s model number before purchasing to ensure this OEM part is compatible with your appliance.
Other Whirlpool Washer Control Boards
Affiliate Disclosure: Some links on this page are affiliate links. If you purchase through these links, we may earn a small commission at no additional cost to you. Thank you for supporting our website.