The W11414731 Whirlpool washer lid lock switch is a replacement lid-lock component used on select Whirlpool top-load washing machines. The lid lock is an important safety component that helps keep the washer lid securely closed during certain wash and spin cycles.
If your Whirlpool washer will not start, refuses to spin, or displays a lid-lock-related error, a faulty lid lock assembly may be one possible cause.
What Is the W11414731 Lid Lock Switch?
The W11414731 is a Whirlpool washer lid lock switch/assembly designed for compatible top-load washers.
The lid lock detects whether the washer lid is properly closed and locked. When the washer control detects that the lid is not securely locked, it may prevent the washer from starting or entering certain parts of the cycle.
A failed lid lock can therefore cause symptoms that may look like a control-board, motor, or other washer problem.
Common Symptoms of a Bad Washer Lid Lock
A defective lid lock may cause one or more of these problems:
- Washer will not start
- Washer stops before the spin cycle
- Lid lock light flashes or stays on
- Washer says the lid is not locked
- Washer fills with water but does not continue the cycle
- Washer will not spin
- Lid does not lock properly
- Washer starts and then stops unexpectedly
- Lid-lock-related error codes appear
These symptoms do not always mean the lid lock itself is defective. Wiring, connectors, the control board, or a mechanical problem with the lid can also cause similar symptoms.
W11414731 Compatibility
Before ordering a W11414731 replacement, check your washer’s complete model number.
Whirlpool uses different parts across different washer models, and a part that looks similar may not be compatible with your specific machine.
The safest way to verify compatibility is to:
- Locate the washer model number.
- Write down the complete model number, including letters and numbers.
- Compare it with the replacement part’s compatibility information.
- Check the original part number when possible.
- Confirm that W11414731 is listed for your exact washer model.
W11414731 Replacement Part Numbers
W11414731, DTL6000, DTL60003, 4964074, AP7002928, EAP16543458, PS16543458, AWP45832, PD00073744
Compatible Model Numbers
Whirlpool
WTW5020SW0, WTW5010LW0, WTW4100SW0, WTW4307SW0, WTW5025SW0, WTW5057LW0, WTW5015LW0, WTW4105SW0, WTW4300SW0, MVW5035MW0, WTW5015LW1, WTW4107SW0, WTW5057LW1, WTW5010LW1, and more.
Crosley
CAW45125LW1, CAW45125LW0, CWW4512RW0
Maytag
MTW4205SW0, MTW4200SW0, MVW5035MW0
Note: Do not rely only on the appearance of the part. Always verify the part number and model compatibility before purchasing.
How to Check a Whirlpool Washer Lid Lock
Before replacing the lid lock, perform a few basic checks.
1. Check the Lid
Make sure nothing is preventing the washer lid from closing completely. Clothing or another object caught around the lid can prevent the lock from engaging.
2. Inspect the Lid Lock Area
Look for visible damage, broken plastic, debris, or signs that the lock has been physically damaged.
3. Check the Wiring
With the washer safely disconnected from power, inspect the wiring and connector leading to the lid-lock assembly. A loose or damaged connection can produce symptoms similar to a failed switch.
4. Check for Error Codes
If the washer displays an error code, note the exact code. It can provide useful information when diagnosing a lid-lock or control problem.
5. Verify the Replacement Part
If the lid lock appears defective, verify that W11414731 is the correct replacement for your exact Whirlpool washer model before ordering.
How to W11414731 Replacement
If you determine that the lid lock needs to be replaced, the replacement process generally involves accessing the lid-lock assembly, disconnecting the electrical connector, removing the existing component, and installing the replacement.
The exact procedure varies by washer model.
Always disconnect the washer from electrical power before servicing it and follow the repair instructions for your specific model.
Is your Whirlpool washer lid lock not working, or is the washer refusing to start or spin? Watch this helpful repair video by Bens Appliances and Junk to see how to replace the W11513248 / W11414731 lid lock assembly and get your washer working again.
Watch the video below to see the replacement process step by step.
Note: If you are not comfortable working on the appliance, consider having a qualified appliance technician perform the repair.
Where to Buy W11414731
When shopping for a W11414731 Whirlpool washer lid lock switch, compare:
- Exact part number
- Washer model compatibility
- Seller reputation
- Product condition
- Price
- Shipping cost
- Return policy
- Warranty, if available
Check the complete model number before clicking Buy Now to reduce the risk of ordering an incompatible part.
Affiliate Disclosure: FixCodex may earn a commission if you purchase a product through links on this page, at no additional cost to you.
Frequently Asked Questions
What is W11414731?
W11414731 is a Whirlpool washer lid-lock component used on select compatible top-load washing machines.
What does a Whirlpool lid lock do?
The lid lock detects and helps secure the washer lid during parts of the wash cycle. If the washer cannot confirm that the lid is properly locked, it may prevent the cycle from continuing.
Can a bad lid lock prevent a Whirlpool washer from spinning?
Yes. A washer may prevent the spin cycle from starting if the control does not detect that the lid is safely locked. However, other problems can cause a washer not to spin, so proper diagnosis is important.
How do I know if W11414731 fits my washer?
Check the complete model number of your Whirlpool washer against the seller’s compatibility information and Whirlpool parts information. Do not assume compatibility based only on the part’s appearance.
Should I replace the lid lock myself?
Some homeowners can replace a lid-lock assembly using basic tools, but the procedure varies by model. Always disconnect power first and follow model-specific repair instructions. If you are unsure, use a qualified appliance technician.
Final Check Before Ordering
W11414731 may be the right solution if your compatible Whirlpool washer has a faulty lid-lock assembly.
Before purchasing, remember:
Model number → Part number → Compatibility → Price → Return policy
Taking a few minutes to verify these details can help you avoid ordering the wrong washer part.
1 thought on “W11414731 Whirlpool Washer Lid Lock Switch”