Samsung Washer Drain Pump DC31-00054A is a replacement drain pump designed to remove water from compatible Samsung washing machines during the drain portion of the wash cycle. If your washer is not draining, leaves water in the tub, or makes unusual noises while trying to drain, the drain pump may need to be inspected or replaced.
“If your Samsung washer isn’t draining properly, the DC31-00054A drain pump may help restore normal water drainage. Always verify your washer model before ordering.”
The DC31-00054A is also associated with replacement and cross-reference numbers including DC31-00016A, AP4202690, PS4204638, EAP4204638, 1534541, and DC97-18150B. Always verify your washer’s complete model number before ordering because compatibility varies by model.
Product Overview
The washer drain pump is responsible for moving used water out of the washing machine. During the drain cycle, the pump helps remove water from the tub so the washer can continue to the next stage of the cycle.
When the pump becomes clogged, damaged, or fails electrically, the washer may have difficulty draining. Replacing a faulty pump with the correct part can restore normal water drainage.
Part Number: DC31-00054A
Part Type: Washer Drain Pump
Brand: Samsung
Appliance Type: Washing Machine
Replacement Part: DC31-00054A
Common Replacement Number: DC31-00016A
Other Cross-Reference Numbers: AP4202690, PS4204638, EAP4204638, 1534541, DC97-18150B
Symptoms of a Bad Samsung Washer Drain Pump
A failed or restricted drain pump can cause several common washer problems:
- Washer does not drain properly
- Water remains inside the washer after a cycle
- Washer stops before the spin cycle
- Washer takes a long time to drain
- Drain pump makes a humming or grinding noise
- Pump runs but does not remove water
- Washer displays a drain-related error
- Water drains very slowly
- Washer cannot complete the wash cycle
However, a drain problem does not always mean the pump itself has failed. A clogged drain hose, filter, or pump inlet can produce similar symptoms. Check for blockages before replacing the pump.
What Does the DC31-00054A Drain Pump Do?
The DC31-00054A drain pump removes wastewater from the washing machine during the drain cycle.
A typical drain process works like this:
- The washer finishes the washing or rinsing portion of the cycle.
- The control system activates the drain pump.
- The pump moves water away from the tub.
- Water travels through the drain hose.
- The washer continues to the next part of the cycle after the water level has been reduced.
If the pump motor cannot operate correctly or the pump is blocked, water may remain inside the washer.
Compatible Samsung Washer Models
The DC31-00054A is used on a range of Samsung washer models. Examples reported in current parts catalogs include:
- WA5451ANW/XAA
- WA5471ABP/XAA
- WA5471ABW/XAA
- WF206BNW/XAA
- WF209ANW/XAA
- WF210ANS/XAC
- WF210ANW/XAA
- WF210ANW/XAC
- WF218ANB/XAA
- WF218ANB/XAC
- WF218ANS/XAC
- WF218ANW/XAA
- WF218ANW/XAC
- WF219ANB/XAA
- WF219ANW/XAA
- WF220ANW/XAA
- WF220ANW/XAC
- WF221ANG/XAA
- WF221ANS/XAA
- WF229ANG/XAC
- WF306LAW/XAA
- WF317AASXAA
- WF328AAG/XAA
- WF328AAR
- WF328AAR/XAA
- WF328AAW/XAA
- WF330ANB/XAA
- WF330ANW/XAA
- WF331ANW/XAA
- WF337AAG/XAA
- WF338AAB/XAA
- WF338AAW/XAA
- WF350ANR/XAA
- WF350ANW/XAA
- WF409ANR/XAA
- WF409ANW/XAA
- WF410ANR/XAA
- WF410ANW/XAA
- WF419AAU/XAA
- WF419AAW/XAA
- WF438AAR/XAA
- WF448AAE/XAA
- WF448AAP/XAA
- WF448AAP/XAC
- WF448AAW/XAC
- WF520ABP/XAA
- WF520ABP/XAC
- WF520ABW/XAA
This is only a partial model list. Current parts sources list many additional compatible model variations and revisions. Always check the complete washer model number against the manufacturer’s or parts supplier’s compatibility information before purchasing.
DC31-00054A Replacement and Cross-Reference Numbers
You may find this drain pump listed under several different part numbers.
Primary part number:
- DC31-00054A
Common replacement or previous part numbers:
- DC31-00016A
- DC97-18150B
Cross-reference numbers:
- AP4202690
- PS4204638
- EAP4204638
- 1534541
- ASM33517
- PD00001978
Different sellers may use different reference numbers for the same replacement part, so comparing the part number and washer model is important.
How to Tell If Your Washer Drain Pump Needs Replacement
Before buying a new DC31-00054A, check the washer for simple drainage problems.
1. Check the Drain Hose
Make sure the drain hose is not kinked, crushed, or blocked.
2. Check the Pump Filter
Debris such as lint, coins, buttons, or small objects can restrict water flow.
3. Check the Pump Inlet
Foreign objects can sometimes enter the pump and prevent the impeller from turning properly.
4. Listen to the Pump
A pump that hums but does not move water may be blocked or damaged.
5. Check for Leaks
A damaged pump or pump housing may leak water during operation.
6. Check the Wiring
A loose connector or damaged wire can prevent the pump from receiving power.
If the hose and filter are clear and the pump still cannot drain water properly, replacement may be necessary.
🔧 Watch: How to Replace Samsung Drain Pump DC31-00054A
Is your Samsung washer not draining, leaving water in the tub, or making a strange noise? This helpful video from AppliancePartsPros shows how to replace the Samsung DC31-00054A drain pump step by step.
Watch the video to see the replacement process before starting your repair.
DC31-00054A Installation
Replacing a washer drain pump involves working around water and electrical connections. Disconnect the washer from electrical power before beginning the repair.
A general replacement procedure is:
- Unplug the washing machine.
- Turn off the water supply if required.
- Remove the appropriate access panel.
- Locate the drain pump.
- Prepare for residual water inside the hoses.
- Disconnect the electrical connector.
- Disconnect the drain hoses from the pump.
- Remove the old pump.
- Install the replacement DC31-00054A.
- Reconnect the hoses and electrical connector.
- Reinstall the access panel.
- Restore power.
- Run a test cycle and verify that the washer drains correctly.
The exact procedure varies by Samsung washer model, so follow the service information for your specific appliance. Samsung parts listings also recommend unplugging the appliance before installation and using appropriate safety practices.
Important Compatibility Information
Do not order the DC31-00054A based only on the appearance of the old pump.
Samsung produced many washer models with similar-looking components. The safest way to confirm compatibility is to compare:
- Washer model number
- Existing pump part number
- Connector configuration
- Pump design
- Manufacturer’s compatibility list
For example, the DC31-00054A is documented for numerous WF and WA series Samsung washers, including WF410ANW/XAA, WF350ANW/XAA, WF448AAP/XAA, WF520ABP/XAA, and others.
Frequently Asked Questions
What is Samsung part DC31-00054A?
DC31-00054A is a Samsung washer drain pump used to remove water from compatible washing machines during the drain cycle.
What does DC31-00054A replace?
Commonly listed replacement or cross-reference numbers include DC31-00016A, AP4202690, PS4204638, EAP4204638, and 1534541.
Why is my Samsung washer not draining?
Possible causes include a clogged drain hose, blocked filter, foreign object in the pump, damaged wiring, or a failed drain pump. Check for simple blockages before replacing the pump.
Can I replace the DC31-00054A myself?
A DIY replacement may be possible if you are comfortable with basic appliance repair. The washer must be disconnected from power, and residual water should be expected when removing the pump hoses.
How do I know if DC31-00054A fits my washer?
Check your washer’s complete model number against a reliable compatibility list. Do not rely on the part number alone.
Does DC31-00054A fit every Samsung washer?
No. It is compatible with many Samsung washer models, but not every Samsung washing machine. Verify the exact model before ordering.
Is DC31-00054A the same as DC31-00016A?
Current parts listings identify DC31-00016A as a previous/replacement number associated with DC31-00054A. Confirm compatibility with your appliance model before ordering.
What happens if I install the wrong drain pump?
The pump may not fit correctly, the electrical connector may not match, or the washer may not drain properly. Always verify the exact model and part number before installation.
Why Replace a Faulty Drain Pump?
A properly functioning drain pump is essential for normal washer operation. If the pump cannot remove water, the washer may stop during the cycle or leave standing water in the tub.
Replacing a defective pump can help restore:
- Proper water drainage
- Normal wash-cycle operation
- Proper spin-cycle operation
- Faster water removal
- Reliable washer performance
Buy DC31-00054A Samsung Washer Drain Pump
If your Samsung washer uses DC31-00054A, replacing a worn or failed drain pump can be an effective way to restore proper drainage.
Before ordering, verify your washer model number and compare it with the compatibility information. If your old pump is marked DC31-00054A or DC31-00016A, use the model number to confirm that the replacement is correct.
Product Details at a Glance
| Specification | Details |
|---|---|
| Part Number | DC31-00054A |
| Part Type | Washer Drain Pump |
| Brand | Samsung |
| Appliance | Washing Machine |
| Function | Removes water during drain cycle |
| Previous Part Number | DC31-00016A |
| Cross Reference | AP4202690 |
| Cross Reference | PS4204638 |
| Cross Reference | EAP4204638 |
| Cross Reference | 1534541 |
| Cross Reference | DC97-18150B |
| Compatibility | Select Samsung washer models |
| Installation | Model-specific |
| Important | Verify model number before ordering |
Buy DC31-00054A Samsung Washer Drain Pump on eBay
Important: Please verify your washer model number for compatibility before ordering this part.
DC31-00054A Samsung Washer Drain Pump is a replacement drain pump for select Samsung washing machines. It removes water from the washer during the drain cycle and can help resolve problems such as standing water, slow draining, and a washer that stops before completing the cycle.
The part is associated with replacement numbers including DC31-00016A, AP4202690, PS4204638, EAP4204638, and 1534541. Verify your washer’s exact model number before purchasing to ensure proper compatibility.
Related Troubleshooting and Parts:
- Samsung Washer Not Draining
- Samsung Washer Drain Pump Replacement
- Samsung Washer Error Codes
- Samsung Washer Parts
- Samsung Washer Drain Hose
- Samsung Washer Pump Filter
- Samsung Washer Water Drain Problems
- Samsung WF410ANW/XAA Parts
- Samsung WF350ANW/XAA Parts
- Samsung WF448AAP/XAA Parts
- Samsung WF520ABP/XAA Parts
Other Washer Drain Pumps and Guides:
- LG Washer Error Codes: Complete Troubleshooting Guide
- 4681EA2001T LG Washer Drain Pump & Motor Assembly
- WP3363394 Whirlpool Washer Drain Pump – Replacement Part
Affiliate Disclosure: This page contains affiliate links. If you purchase the Samsung DC31-00054A Washer Drain Pump through one of our links, we may earn a small commission at no extra cost to you. This helps support our website and allows us to continue providing useful appliance repair information.