The W11513248 Whirlpool washer lid lock switch is compatible with select Whirlpool, Crosley, and Maytag washer models, including WTW4105SW0, WTW5020SW0, WTW4300SW0, WTW5010LW0, WTW5057LW1, and WTW4107SW0.
Other compatible models include WTW5015LW1, WTW5057LW0, WTW4100SW0, WTW5015LW0, WTW4307SW0, WTW5025SW0, CAW45125LW0, CAW45125LW1, MTW4200SW0, and MTW4205SW0.
The W11513248 Whirlpool washer lid lock is a replacement lid-lock component for select Whirlpool top-load washing machines. If your washer lid won’t lock, the washer won’t start, or the washer won’t spin, a faulty lid lock may be one possible cause.
Before buying a W11513248 replacement part, always verify the complete model number of your washer to make sure this Whirlpool W11513248 replacement is compatible.
W11513248 Lid Lock Switch
The W11513248 lid lock switch helps the washer detect whether the lid is properly closed and locked. The washer’s control system uses this information to determine whether it is safe to continue certain parts of the wash cycle.
When the lid lock does not work correctly, the washer may stop the cycle or prevent it from starting.
A defective W11513248 lid lock assembly may be associated with several common washer problems.
Common W11513248 Lid Lock Problems
A bad Whirlpool washer lid lock switch may cause:
- Whirlpool washer lid won’t lock
- Whirlpool washer won’t start
- Whirlpool washer won’t spin
- Washer stops before the spin cycle
- Lid-lock light flashes or remains on
- Washer reports that the lid is not locked
- Washer starts and then stops
- Washer fills with water but does not continue
- Lid does not lock properly
- Lid-lock-related error codes
These symptoms can also be caused by wiring, connectors, the control board, the lid, or another component. Therefore, replacing the lid lock should not be based on symptoms alone.
W11513248 Washer Replacement Parts and Compatible Model Numbers
The W11513248 Whirlpool washer part is intended for compatible Whirlpool washing machines. Model compatibility is more important than simply matching the brand.
W11513248 Replacement Part Numbers
The W11513248 Whirlpool washer lid lock may also be identified by the following previous, production, and competitor part numbers. Use these numbers when searching for a compatible replacement, but always verify your washer model before ordering.
Replacement Part Numbers: W11414731, DTL6000, DTL60003, 4964074, AP7002928, EAP16543458, PS16543458, AWP45832, PD00073744
Compatible Model Numbers
The W11513248 Whirlpool washer lid lock is compatible with select Whirlpool, Crosley, and Maytag washer models. Always verify your complete model number before ordering.
Whirlpool
WTW4105SW0, WTW5020SW0, WTW4300SW0, WTW5010LW1, WTW5010LW0, WTW5057LW1, WTW4107SW0, WTW5015LW1, MVW5035MW0, WTW5057LW0, WTW4100SW0, WTW5015LW0, WTW4307SW0, WTW5025SW0, and more.
Crosley
CAW45125LW0, CWW4512RW0, CAW45125LW1
Maytag
MTW4200SW0, MVW5035MW0, MTW4205SW0
Note: Your washer’s model number is normally found on a manufacturer’s label or tag. Record the complete model number, including letters and numbers, before searching for the replacement.
How to Diagnose a Whirlpool Washer Lid Lock
If your Whirlpool washer lid lock is not working, start with a few basic checks.
Check the Lid
Make sure the washer lid closes completely. Clothing or another object can sometimes prevent the lid from closing correctly.
Inspect the Lock
Look for visible damage, broken plastic, debris, or anything preventing the lid from engaging with the lock.
Check the Wiring
Disconnect the washer from electrical power before inspecting wiring. Look for a loose connector, damaged wire, or other visible wiring problem around the Whirlpool top load washer lid lock.
Check Error Codes
If your washer displays an error code, record the exact code. It may provide useful information when diagnosing a Whirlpool washer lid lock problem.
Verify the Part
If the lid lock is determined to be defective, confirm that W11513248 is listed as the correct replacement for your exact washer model.
Can W11513248 Cause a Washer Not to Spin?
Yes. A washer may refuse to spin if the control system cannot confirm that the lid is properly locked.
However, a Whirlpool washer won’t spin problem does not automatically mean the lid lock is defective. Other possible causes include drive-system problems, motor problems, wiring issues, control-board problems, or an unbalanced load.
Diagnose the washer before purchasing a replacement W11513248 lid lock assembly.
W11513248 Lid Lock Assembly Replacement
Replacing the W11513248 lid lock assembly varies by Whirlpool washer model. The exact procedure may involve accessing the lid-lock area, disconnecting the electrical connector, removing the existing assembly, and installing the replacement.
Always:
- Disconnect electrical power before servicing.
- Follow the repair instructions for your specific model.
- Avoid forcing connectors or plastic components.
- Verify the replacement before installation.
- Contact a qualified appliance technician if you are uncomfortable performing the repair.
Do not choose a replacement simply because it looks like your original lid lock. Whirlpool uses different lid-lock assemblies on different washer models.
Whirlpool Washer Lid Lock Won’t Work?
Is your Whirlpool washer lid lock not working, causing the washer not to start or spin? Watch this helpful repair video by Bens Appliances and Junk to see how to replace the W11513248 / W11414731 lid lock assembly and follow the replacement process step by step.
Where to Buy W11513248
If you need a W11513248 replacement lid lock switch, compare the available listings based on:
- Exact part number
- Compatible washer models
- Price
- Shipping cost
- Seller reputation
- Return policy
- Product condition
Shop for W11513248 on eBay and compare current listings before purchasing.
Affiliate Disclosure: FixCodex may earn a commission when you purchase through affiliate links on this page, at no additional cost to you.
Frequently Asked Questions
What is W11513248?
W11513248 is a Whirlpool washer lid-lock component used on select compatible washing machines.
What does the W11513248 lid lock do?
The lid lock helps the washer determine whether the lid is securely closed and locked before continuing certain portions of the wash cycle.
Why won’t my Whirlpool washer lid lock?
Possible causes include a defective lid-lock assembly, an obstruction around the lid, damaged wiring, a connector problem, or another washer component.
Can a bad lid lock prevent a Whirlpool washer from starting?
Yes. If the washer cannot detect that the lid is properly locked, it may prevent the cycle from starting.
Can a bad lid lock cause a Whirlpool washer not to spin?
Yes. The washer may prevent the spin cycle when it cannot confirm that the lid is safely locked. However, other problems can also cause a washer not to spin.
How do I know if W11513248 fits my washer?
Check the complete washer model number against the seller’s compatibility information before purchasing. Do not assume that W11513248 fits every Whirlpool washer.
Is W11513248 a universal Whirlpool washer lid lock?
No. Whirlpool uses different lid-lock parts across different models. Always verify model compatibility before ordering.
Final Buying Checklist
Before ordering a W11513248 Whirlpool washer lid lock, verify:
✓ Complete washer model number
✓ W11513248 part number
✓ Compatible model information
✓ Seller and product details
✓ Price and shipping
✓ Return policy
Finding the correct W11513248 replacement part before ordering can save time and help get your Whirlpool washer back in working condition.
Other Washer Lid Lock Replacement Parts:
- W11307244 Whirlpool Washer Lid Lock Switch
- W10682535 Whirlpool Washer Lid Lock Switch
- W11414731 Whirlpool Washer Lid Lock Switch
Need a different lid lock for your Whirlpool washer? Find more Whirlpool Washer Lid Locks here to explore additional replacement parts, compatible models, and troubleshooting information.
1 thought on “W11513248 Whirlpool Washer Lid Lock Switch”